July 2019-July2020
All the parts have several coats of high build primer.
Using a guide coat and a block I began to sand in an X pattern
until the guide coat is gone.
I need to reapply primer sometimes and continue to block until I
know its perfectly flat.
Lots of necessary work.
The same procedure is repeated on all the other panels.
.
Everything is dead straight!
Hung up and ready for primer sealer..
After a couple coats of primer sealer, next is color!
Blocking out the HUGE hood.
 |
Both front fenders are also block sanded to assure a
perfectly flat surface. |
Primer sealer on the hood and the inside edge and top of the
fenders. It's really getting there!
COLOR!
3 coats of paint on the hood and the jams of the front fenders.
It looks soooo good!
3 coats of clear over the beautiful paint, WOW that makes a huge
difference.
A short time lapse of sealing, painting and clear on the front
fenders.
Preparing the rear quarters for primer.
It's ready!
All covered with epoxy primer.
|
This is really a milestone, all the metal work done
and everything is one color. |
 |
High build primer sprayed and blocked out. I lost
the pictures in between this and the last pictures. |
 |
Seam sealer is spread liberally on any body to body
panel seams. This keeps water from getting between
the panels, a very important step. |
Next step primer sealer and then paint!
More color soon!
